Protection Functions; Over-Temperature Protection - Klarstein TrinityCook Hybrid Bedienungsanleitung

EN

PROTECTION FUNCTIONS

Over-temperature protection

The appliance is equipped with a temperature sensor device to monitor the temperature
inside the hobs. When an excessive temperature is detected, both the Induction Hob
and the Hi-Light Ceramic Hob will stop increasing temperature automatically.
Detection of small articles (Induction Hob)
When the Induction Hob detected the existence of a pot which is less than 80 mm in
diameter or small articles (e.g. knife, fork, forceps, key, etc.) or non-magnetic pots (such
as aluminium or bronze pot), the buzzer can gives out an alarm lasting about 1 minute.
In case user has not put proper pot in time, the Induction Hob shall automatically switch
to standby mode.
Residual heat after use
When the hob is used for a long period of time, heat remains in the heating zone for a
few minutes.
Auto shutdown protection
Auto shutdown is a safety protection function of the appliance. If not turned-off after
120 minutes, it will shuts down automatically.
When pot is removed, the induction hob shall stop heating immediately and shut down
after 1 minute of buzzer sound.
33