Plug in the oven. The oven display will display: "0:00", an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock, see below.
Your oven has a 24 hour clock mode.
1. Press the CLOCK SET key
2. Press the time keys and enter the current time. Enter the hours by pressing the 10 min key and enter the minutes by
pressing the 1 min and 10 s keys.
3. Press the CLOCK SET key
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the
display will only show "0:00" when cooking is complete.
• To check the time of day during a cooking process, press CLOCK SET key and the LED will display the time of day for 2-3
seconds. This does not aff ect the cooking process.
• While in the clock setting mode, if the STOP key is pressed or if there is no operation within 1 minute, the oven will go back
to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the
power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.
Power Level
HIGH
MEDIUM HIGH
MEDIUM
MEDIUM LOW
(DEFROST)
LOW
• Your oven has 11 power levels, as shown.
• To change the power level for cooking, press the MICROWAVE POWER LEVEL key until the display indicates the desired
level. Set up the desired cooking time by pressing time keys. Press the START key to start the oven.
• To check the power level during cooking, press the MICROWAVE POWER LEVEL key.
As long as your fi nger is pressing the MICROWAVE POWER LEVEL key the power level will be displayed. The oven continues
to count down although the display will show the power level.
• If "0P" is selected, the oven will work with fan for no power. You can use this level to remove any odours.
Generally the following recommendations apply:
100P/90P - (HIGH) used for fast cooking or reheating e.g. for casseroles, hot beverages, vegetables etc.
once and "00:00" will fl ash.
to fi nish clock setting.
MICROWAVE POWER LEVEL
Press the MICROWAVE
POWER LEVEL key
x1
x2
x3
x4
x5
x6
x7
x8
x9
x10
x11
EN-17
EN-17
BEFORE OPERATION
SETTING THE CLOCK
EN
Display
(Percentage)
100P
90P
80P
70P
60P
50P
40P
30P
20P
10P
0P