Switching The Beeper Off - Samsung MC28M6065 Serie Benutzerhandbuch

3
4
5
MC28M6065CK_SW_DE68-04444L-01_EN.indd 31
3. Select the appropriate power level by
turning the Multi Function Selector Dial
until the corresponding output power
is displayed (450, 300, 180, 100 W).
At that time, press the Multi Function
Selector Dial to set the power level.
• If don't set the power level within
5 seconds, automatically changes
to the cooking time setting stage.
(Default : 450 W)
The following indications are displayed:
(Microwave & Hot blast combi
mode)
180 °C (Temperature)
4. Select the appropriate temperature by
turning the Multi Function Selector Dial
(Temperature : 200-40 °C). At that time,
press the Multi Function Selector Dial to
set the power level.
• If don't set the temperature within
5 seconds, automatically changes
to the cooking time setting stage.
(Default : 180 °C)
5. Set the cooking time by turning the
Multi Function Selector Dial.
• The maximum cooking time is 60
minutes.
6. Press the START/+30s button.
6

Switching the beeper off

You can switch the beeper off whenever you want.
1. Press the Microwave and STOP/ECO
1
2
2. To switch the beeper back on, press the
1
2
Combination cooking starts. The oven is
heated to the required temperature and
then microwave cooking continues until
the cooking time is over. When it has
finished.
1) The oven beeps 4 times.
2) The end reminder signal will beep 3
times (once every minute).
3) The current time is displayed again.
button at the same time.
The oven does not beep to indicate the
end of a function.
• The following indications are
displayed:
Microwave and STOP/ECO button again
at the same time.
The oven operates normally.
• The following indications are
displayed:
English 31
2018-04-17 12:05:20