Silvercrest SFB 10.1 C3 Bedienungsanleitung Und Sicherheitshinweise Seite 53

4. Press
confirm. The first brand name alphabetically for the preset devices
appears on the display.
5. Press
"SilverCrest".
6. To accelerate the brand search you can enter the first or all
characters of the brand name via the numeric keypad (11). Then
press
character of the brand name (e.g. S for SilverCrest), pressing the
button will show the first brand name starting with S. Then you need
to press the
SilverCrest brand.
As well as the digits, the keypad buttons also have characters or symbols
assigned that you can select by pressing them once or more. The
characters or symbols assigned are printed on the number keys.
After selecting a character and waiting for a few seconds, this character
is applied and you can enter the next character. You can enter up to 11
characters for a brand name. If you make a mistake, press
delete the last character and enter it again.
7. Typically, different device manufacturers use different codes for their
remote controls. At this point you'll have to find the optimum code.
The current code is shown under the selected brand name. You can
press the
brand.
8. Now test the code selected by pointing the remote control at the
device and checking if it responds properly to the button pressed . It
is not necessary to exit the setup mode to perform this test.
The following buttons cannot be used for the function test:


the device buttons (4)

the numeric keypad (11)
9. If most of the buttons work properly, press
the device button selected .
10. If no buttons work properly or only a few do, press
next code and repeat the test as described in step 8. Repeat this
procedure as many times as necessary until you have found suitable
code.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Repeat the above procedure for all devices you wish to control with your
new remote control.
, select "BRAND SRCH" and press
to navigate to the brand name you want, e.g.
to go to the selected brand. If you only enter the first
buttons to select the preset codes for the desired
,
buttons to manually scroll to the
, ,
SilverCrest SFB 10.1 C3
. The code is saved for
to select the
English - 51
to
to