Intended Use; General Instructions; Instruction Manual; Personal Protective Equipment - Makita DUR192L Betriebsanleitung

Important safety instructions for the
tool
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
Save all warnings and instruc-
tions for future reference.

Intended use

1. This tool is only intended for cutting grass,
weeds, bushes and undergrowth. It should not
be used for any other purpose such as edging
or hedge cutting as this may cause injury.

General instructions

Never allow people unfamiliar with these
1.
instructions, people (including children) with
reduced physical, sensory or mental capabil-
ities, or lack of experience and knowledge to
use the tool. Children should be supervised to
ensure that they do not play with the tool.
2. Before starting the tool, read this instruction
manual to become familiar with the handling of
the tool.
3. Do not lend the tool to a person with insuffi-
cient experience or knowledge regarding han-
dling of brushcutters and string trimmers.
4. When lending the tool, always attach this

instruction manual.

5. Handle the tool with the utmost care and
attention.
Never use the tool after consuming alcohol or
6.
drugs, or if feeling tired or ill.
7. Never attempt to modify the tool.
8. Follow the regulations about handling of
brushcutters and string trimmers in your
country.

Personal protective equipment

► Fig.1
1. Wear protective goggles to protect yourself
from flying debris or falling objects.
2. Wear ear protection such as ear muffs to pre-
vent hearing loss.
3. Wear proper clothing and shoes for safe
operation, such as a work overall and sturdy,
non-slip shoes. Do not wear loose clothing or
jewelry. Loose clothes, jewelry or long hair can be
caught in moving parts.
Work area safety
Operate the tool under good visibility and day-
1.
light conditions only. Do not operate the tool in
darkness or fog.
Do not operate the tool in explosive atmo-
2.
spheres, such as in the presence of flammable
liquids, gases or dust. The tool creates sparks
which may ignite the dust or fumes.
During operation, never stand on an unstable
3.
or slippery surface or a steep slope. During
the cold season, beware of ice and snow and
always ensure secure footing.
4. During operation, keep bystanders or animals
at least 15 m away from the tool. Stop the tool
as soon as someone approaches.
5. Never operate the tool while people, especially
children, or pets are nearby.
Before operation, examine the work area for
6.
stones or other solid objects. They can be
thrown and result in serious injury and/or property
damage.
WARNING: Use of this product can create
7.
dust containing chemicals which may cause
respiratory or other illnesses. Some examples
of these chemicals are compounds found in
pesticides, insecticides, fertilizers and herbi-
cides. Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
Electrical and battery safety
1. Do not expose the tool to rain or wet condi-
tions. Water entering the tool will increase the risk
of electric shock.
2. Do not use the tool if the switch does not
turn it on and off. Any tool that cannot be con-
trolled with the switch is dangerous and must be
repaired.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before installing a
battery pack, picking up or carrying the tool.
Carrying the tool with your finger on the switch or
energising the tool that have the switch on invites
accidents.
4. Avoid dangerous environment. Don't use the
tool in dump or wet locations or expose it to
rain. Water entering the tool will increase the risk
of electric shock.
5. Do not dispose of the battery(ies) in a fire.
The cell may explode. Check with local codes for
possible special disposal instructions.
6. Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if
swallowed.
7. Do not charge battery in rain, or in wet locations.
Recharge only with the charger specified by
8.
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
11 ENGLISH