Danger Levels; Hazardous Areas - Corghi ERCO 4004 Serie Betriebsanleitung

3.4 DANGER LEVELS

Pay special attention to the following danger sign when you find it in this manual, and follow the safety recommendations.
Danger signals have three levels:
DANGER: this signal warns that, if the described operations are not carried out correctly, they cause severe injury, death or health
long-term risks.
WARNING: this signal warns that, if the described operations are not carried out correctly, they may cause severe injury, death or health
long-term risks.
CAUTION: this signal warns that, if the described operations are not carried out correctly, they may cause machine damage and/or
personal injuries.
WARNING: carefully read the following rules; whoever does not put into practice the recommendations described hereinafter may be subject
to irreparable damages or cause them to people, animals or property.
The Company disclaims any and whatever liability arising from the failure to comply with the safety and accident-prevention rules described
hereinafter.
The Company also disclaims any liability for damages caused by lift improper use and/or due to changes made without the manufacturer's authorisation.

3.5 HAZARDOUS AREAS

• Before using the lift, make sure that no unauthorised persons nor animals are present within the hazardous area delimited
by the yellow stripe (Fig. 2).
• Persons or animals shall by no means stop or pass within the hazardous area delimited by the yellow stripe (Fig. 2), when
using lift even for small movements, and whenever the Emergency Switch/OFF (17, Fig. 1) is not in the "0" position.
• Figure 2 indicates the lift hazard areas for persons or animals. It is strictly forbidden to approach this area if lift is moving due
to the hazard of all machine mobile parts.
24