Removing The Door - Inventum IOP6272BK Benutzerhandbuch

Preparing for pyrolysis
1. Remove the accessories from the appliance.
2. Remove the majority of food residue manually.
Warning:
Food residue can cause a risk of fire during pyrolysis.
3. Clean the inside of the door and the seal. Use warm water and a mild cleaning agent.
Caution:
Do not remove the seal or use an abrasive sponge for cleaning.
Starting the pyrolysis function
Note:
During pyrolysis, the door of the appliance is automatically locked and the lamp is off.
1. Make sure that the appliance is prepared for pyrolysis.
2. Make sure that the appliance is switched on.
3. Touch the function button to select the pyrolysis function. The oven indicator shows the pyrolysis mode.
4. Touch the start/pause button to start the pyrolysis function.
When the pyrolysis finishes, you will hear a continuous sound signal. Push the start/pause button to stop the
sound signal.
Pausing the pyrolysis function
1. Touch the start/pause button one time to pause the function.
Note:
You can open the door when the appliance is cooled down.
Stopping the pyrolysis function
1. Touch the cancel button to stop the function.
Note:
You can open the door when the appliance is cooled down.
Finish the pyrolysis
Warning:
Make sure that the appliance is cooled down.
1. Remove any pyrolysis residue. Use a damp cloth.

REMOVING THE DOOR

Warning:
Risk of injury. Keep your hands away from the hinges.
English • 41