Charging The Rechargeable Battery; Maintenance And Care; Troubleshooting - Melinera HG04235B Montage-, Bedienungs- Und Sicherheitshinweise

2. Exchange the old rechargeable battery
to a new one. Take care to the correct
polarity, when inserting the new rechar-
geable battery. The polarity is indicated
in the battery compartment
rechargeable battery has to have the
same technical data like the old one (see
"Technical data").
3. Now again fasten the battery compart-
ment cover , fasten the fastening
5
screws by using a small cross head
4
screwdriver. Switch the ON / OFF
button to ON position to enable the
6
product switching on during darkness.
Charging the rechargeable
battery
Note that the product must be switched on
when the rechargeable battery is charging.
The charging time of the rechargeable bat-
tery when the solar cell is used depends on
the intensity of the sunlight and the angle of
incidence of the light on the solar panel
Error
The light will not switch on
even though the sun shone on
the product all day.
The light does not come on or
comes on only briefly.
16 GB/IE
Place the solar panel
7
as possible to the angle of incidence of the
light. In this way you will receive the highest
light levels.
. The new
8

Maintenance and care

The LED
is maintenance-free, except for any neces-
sary change of rechargeable battery.
Clean the product regularly with a dry,
lint-free cloth. Use a slightly dampened
cloth to remove more stubborn dirt.

Troubleshooting

Note: This product has delicate electronic
components. This means that if it is placed
near an object that transmits radio signals, it
could cause interference. If you notice that
the product is malfunctioning, remove any
. sources of interference from the area of the
2
product.
Note: Electrostatic discharges may cause
product to malfunction. In the event of such
malfunctions, remove the rechargeable
battery briefly and reinsert them.
Cause
Artificial sources of light,
e.g. street lighting, are in-
terfering with the product.
The rechargeable battery
is broken or there was not
enough daylight.
as perpendicular
2
cannot be replaced. The product
3
Solution
Mount the product in a place
where it cannot be disturbed by
other sources of light.
Replace the rechargeable
battery or mount the product in
a place where it can receive
more sunlight.