SPARK PLUG
• Starting failure and misfiring are often caused
by a fouled spark plug. Clean the spark plug and
check that the plug gap is in the correct range.
For a replacement plug, use the correct type
•
Periodically clean the spark plug and check
that the spark gap is in the correct range.
IMPORTANT
•
Note that using any spark plugs other than those designated may result in the
engine failing to operate properly or in the engine becoming overheated and damaged.
•
To install the spark plug, first turn the plug until it is finger tight, then tighten it a
quarter turn more with a socket wrench.
TIGHTENING TORQUE: 9.8~11.8 N
31. Troubleshooting guide
---------------------------------------------------------------------------------------------------
Case 1. Starting failure
---------------------------------------------------------------------------------------------------
CHECK
---------------------------------------------------------------------------------------------------
fuel tank
fuel filter
sparking (no spark)
spark plug
---------------------------------------------------------------------------------------------------
Case 2. Engine starts but does not keep running/Hard re-starting.
---------------------------------------------------------------------------------------------------
CHECK
fuel tank
muffler, cylinder
air cleaner
cylinder fin, fan cover
---------------------------------------------------------------------------------------------------
When your unit seems to need further service, please consult with service shop in your
area.
Original Bedienungsanleitung FUXTEC FX-MS152T_de_en_fr_rev03
PROBABLE CAUSES
incorrect fuel
fuel filter is clogged
park plug is fouled/wet
plug gap is incorrect
disconnected
PROBABLE CAUSES
incorrect fuel or staled fuel
carbon is built-up
clogged with dust
clogged with dust
ACTION
drain it and with correct fuel
clean
clean/dry
correct (GAP: 0.6~0.7mm)
retighten
ACTION
drain it and with correct fuel
wipe away
wash
clean
47