Press the release button and re-
8.
move the Multi-Use-Brush to re-
move.
→ Fig.
17
Removing the appliance
Disconnect the connection
1.
between the floor nozzle and the
telescopic tube.
→ Fig.
18
Disconnect the connection
2.
between the telescopic tube and
the handle.
→ Fig.
19
Press the two locking catches to-
3.
gether and pull the hose out of the
appliance.
→ Fig.
20
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning products
Only use suitable cleaning products.
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
Do not use harsh or abrasive de-
▶
tergents.
Do not use cleaning products with
▶
a high alcohol content.
Do not use hard scouring pads or
▶
cleaning sponges.
Wash sponge cloths thoroughly
▶
before use.
Cleaning and servicing en
Cleaning the appliance
Requirement: The appliance is
switched off.
→ "Switching off the appliance",
Page 31
Clean the appliance and the ac-
▶
cessory with a soft cloth and a
commercially available plastic
cleaner.
Opening the lid
Requirement: The appliance is
switched off.
→ "Switching off the appliance",
Page 31
Open the lid.
1.
→ Fig.
21
Fold up the lid completely.
2.
Closing the lid
Tip: Check that the dust bag is not
trapped between the lid and the ap-
pliance.
Requirements
¡ The dust bag has been inserted.
¡ The motor protection filter has
been inserted.
¡ The exhaust filter has been inser-
ted.
Close the lid and lock it in place.
▶
Cleaning the dust compart-
ment
Requirement: The dust bag has
been removed.
→ "Changing the dust bag",
Page 34
If required, vacuum the dust com-
▶
partment using a second appli-
ance or clean it with a dry duster
or dusting brush.
a The dust compartment has been
cleaned.
33