Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX operation
Setting the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 10 control channels. To be
able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller's documentation.
1
Press the UP or DOWN button so many times until DMX Set Address is indicated on the display.
Confirm with the ENTER button.
2
Now the display calls up the menu item for the DMX starting address: 001.
3
Use the buttons UP and DOWN to set the address. Confirm with the ENTER button.
4
The display will flash when DMX signals are being received.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
24/28
127079.docx, Version 1.1
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
