Usb Pinning - G&D DVIMUX4-USB Installation Und Bedienung

Configuration

USB pinning

In the default settings of the KVM switch, KVM data and the data of devices con-
nected to the »USB 2.0 Devices« interface are forwarded to the computer of the
active channel.
Enable USB pinning (see page 32) if you want to permanently switch the data of
devices connected to the »USB 2.0 Devices« interface to a defined channel. The per-
manent switching of these devices (see page 13) remains the same even when
switching the KVM channel.
HINWEIS:
USB pinning can be enabled or disabled in the setup menu only.
How to enable or disable USB pinning:
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the Switch mode of the service port is
enabled. Enter »
2. Use the Arrow
3. Press the Space
boards:
disabled  USB pinning disabled (default)
enabled  USB pinning ensabled
4. Press the S
32 · G&D DVIMUX4-USB
#! « to switch to the setup menu.
or Arrow keys to select the
key (repeatedly) to choose between the following key-
key to save your settings.
USB Pinning entry and press Enter .