Control Panel; Using The Blender - Cuisinart BFP603E Gebrauchsanweisung

D. Control panel
ON/OFF
(HIGH): for whipping
(LOW): for mixing
(ICE CRUSH): for crushing ice
(PULSE): for operating in short bursts
PULSE
I. HIGH , LOW and ICE CRUSH
switch will begin to flash to show that the appliance
is in 'stand-by' mode.
press once to activate the appliance.
while the blender is running.
running. Simply press the desired speed button.
currently in use.
II. The PULSE Button
more accurate results.
light will begin to flash to show that the appliance is
now in 'stand-by' mode. Press the
light will illuminate to indicate that this function has
been activated.
the selected speed (HIGH , LOW or ICE CRUSH
Repeat as often as desired.
E. Using the blender
CAUTION: be very careful when handling the sharp
accessories.
speed settings
CAUTION: the total quantity of ingredients (liquids and
solids) may not exceed 1.75L.
CAUTION: Never put your hands in the jar when the
button, a
PULSE blender is plugged in.
).
and bowls before using for the first time.
motor housing.
jar and replace the lid. It is possible to add other
ingredients during the mixing. To do so, remove the
measuring cap and pour the ingredients through the
opening. Replace the measuring cap in the lid after
adding the ingredients.
do so, press the PULSE button then press and release
the button corresponding to the desired speed
making sure that the food falls back to the bottom of
the jar after each pulse.
this appliance lets you achieve the desired results in
just a few seconds.
and unplug the appliance from the mains.
in a blender jar that has come directly from the
dishwasher. Likewise, never place very hot liquids or
ingredients into the glass jar when it is cold.
(except ice cubes or frozen fruit in 1.5cm pieces) in
the jar.
25