Jar Assembly; Dismantling The Jar - Cuisinart BFP603E Gebrauchsanweisung

B. Jar Assembly
and place it on a flat surface.
the bottom of the glass jar.
the blade end into the opening of the jar. BE VERY
CAREFUL WHEN HANDLING THE BLADE ASSEMBLY
AS IT IS VERY SHARP.
and screw it on firmly by turning in a clockwise
direction.
N.B. The locking collar has safety interlock switches that
prevent the appliance from running if the jar assembly is
not fitted properly.
side up.
and turn it clockwise to lock it in place.
N.B. The lid must always be in place on the appliance
when it is running.
Improper positioning could result in damage to the
safety interlock switches.
24
Note: the jar can be fitted onto the motor housing in
4 different positions. The handle may face left or right,
depending on your preferences.
D
use.
C
C. Dismantling the jar
B
not to unscrew the jar from the locking collar while it
is on the motor housing).
A
and remove from the lid.
flat surface. Unscrew the locking collar by turning in
an anticlockwise direction.
HANDLING THE BLADE ASSEMBLY AS IT IS VERY
SHARP.
N.B. Careful not to lose this part as it is necessary for
proper operation of the appliance and its watertightness.