First Time Operation
6
VIDE
O
TV
a) If you do not wish to change the broadcast channel order, go to step 7.
b) If you wish to change the channel order:
1
2
3
4
5
6
7
8
9
0
PROGR
MENU
7
RM 903
S
Adjusting Colour Registration (Convergence)
Due to the earth's magnetism, the picture might become undefined and you could see different colours on the outlines of the images.
In that case, proceed as follows.
Auto converge the Red, Green, and
Blue Lines
1
2
After all available channels are captured and stored, the
Programme Sorting menu appears automatically on the screen
enabling you to change the order in which the channels appear
on the screen.
1 Push the joystick on the remote control $ or 4 to select the
programme number with the broadcast channel you wish to
rearrange, then push z to enter.
2 Push the joystick $ or 4 to select the new programme number
position for your selected broadcast channel, then press OK.
The selected channel now moves to its new programme
position and the other broadcast channels move accordingly.
3 Repeat steps b1) and b2) if you wish to change the order of the
other broadcast channels.
Press the MENU button to exit and return to the normal TV screen.
The set is now ready for use.
Press on the mark
, on the front of the projection TV.
Press
button.
The Auto Convergence function works for about 10 seconds. When the white
cross disappears from the screen, your projection TV is ready for use.
Notes:
The Auto Convergence function does not work when:
• no signal is input.
• the input signal is weak.
• the screen is exposed to spotlights or direct sunlight.
• you watch the teletext broadcast.
• you watch NexTView.
Programme Sorting
PROG CH
LABEL
1
C03
TV 5
2
C05
PRO 7
3
C07
EU-SP
4
C08
SWF
5
C09
RTL
6
C11
SAT
7
C12
MDR
8
C13
DDI
9
C14
DSF
10
C15
RTL 2
11
C16
KAB 1
Select Prog:
Confirm:
Programme Sorting
PROG CH
LABEL
1
C03
TV 5
C03
TV 5
2
C05
PRO 7
3
C07
EU-SP
4
C08
SWF
5
C09
RTL
6
C11
SAT
7
C12
MDR
8
C13
DDI
9
C14
DSF
10
C15
RTL 2
11
C16
KAB 1
Select Position:
Move: OK
GB
9
First Time Operation