Picture Adjustment Menu; Mode; Contrast/Brightness/Colour/Hue/Sharpness; Colour Tone - Sony KE-W50A10E WEGA Bedienungsanleitung

Picture Adjustment menu

Picture Adjustment

Mode:

Custom
Contrast: 50
Brightness: 50
Colour: 25
Sharpness: 25
Noise Reduction: Auto
Dynamic Picture: On

Colour Tone:

Cool
Gamma Correction: 0
Reset
Select: Set: Back:
OK
Mode
Selects the picture mode.
1
2

Contrast/Brightness/Colour/Hue/Sharpness

1
2
Colour Tone
1
2
End:
MENU
Press OK to select "Mode".
Press M/m to select one of the following picture modes, then press OK.
Vivid: For enhanced picture contrast and sharpness.
Standard: For standard picture. Recommended for home entertainment.
Custom: Allows you to store your preferred settings.
Tip
You can also change the picture mode by pressing
Press OK to select the option.
Press </, to set the level, then press OK.
Tip
"Hue" can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).
Press OK to select "Colour Tone".
Press M/m to select one of the following, then press OK.
Cool: Gives the white colours a blue tint.
Neutral: Gives the white colours a neutral tint.
Warm: Gives the white colours a red tint.
You can select the options listed below on the Picture
Adjustment menu. To select options, see "Navigating
through menus" (page 19).
Tip
When you set "Mode" to "Vivid" or "Standard", you can
adjust only "Mode", "Contrast", "Colour Tone", "Noise
Reduction" and "Reset".
repeatedly.
Continued
21
GB