Charging Mobile Devices With The Power Bank - Silvercrest SCP 10000A1 Bedienungs- Und Sicherheitshinweise

approx. 30 seconds in terms of 4 LED indicators to
5
show overall power bank capacity.
6
1 LED light up = 25 %
2 LEDs light up = 50 %
3 LEDs light up = 75 %
4 LEDs light up = 100 %
This is approx percentage of power bank capacity but
not actual measurement.
Charging mobile devices
with the power bank
Use provided USB type A to micro USB cable with adapter
to USB type C or other charging cable purchased
7
from reliable supplier. Connect USB type A port to USB
output (Type A) of the power bank .
4 6
And then connect the other end of the USB type A to
micro USB cable with adapter to USB type C to the
7
micro USB or USB type C port of the mobile device to be
charged. The charging process will start automatically.
In case if the charging process does not begin immedi-
ately, press the ON / OFF switch shortly to begin the
1
charging process. The current battery status of the power
bank is shown during the charging process by the
6
LED indicator .
5
To end the charging process, separate the USB charging
cable from the mobile device and the power bank ,
6
or interrupt the charging by pressing the ON / OFF
switch twice in quick succession. The LED indicator
1
will switch off after approx. 30 seconds.
5
28 GB/IE