Handling And Operation; Charging Mobile Devices With The Power Bank - Silvercrest SPT 5200 A1 Bedienungsanleitung

Handling and operation

Charging mobile devices with the
Power Bank
♦ Insert the microUSB plug of the charging cable 6
into the microUSB charging port of the mobile de-
vice, and insert the USB plug into the USB port 3
on the Power Bank . The charging process starts
automatically .
♦ If charging does not start automatically, press the
ON button 5 briefly to start the charging process .
NOTE
► Alternatively, you can also use the original
charger cable (USB cable) provided by the
respective device manufacturer .
► Reduced charging times are made possible for
compatible devices by the use of the Smart Fast
Charge technology . Compatible connected de-
vices automatically receive the signal to draw
the maximum available charging current .
♦ During the charging process, the current charge
level of the Power Bank is shown via the charge
level LEDs 4 (see table in chapter entitled
Checking the charge level) .
■ 62 │ GB │ MT
SPT 5200 A1