TC
6.5
Select temperature
The status display of the temperature (fig. 2 F, page 4) indicates the selected
temperature range. With an increasing number of illuminating LEDs, the intensity of
the temperature range also increases.
I
NOTE
The following temperature indications are subject to tolerances and are
dependent on the measuring position.
Interior space-temperature at approx. 25 °C ambient temperature:
Status display
seven illuminating LEDs
Cooling
an illuminating LED
seven illuminating LEDs
Heating
an illuminating LED
➤ If you want to select the temperature to cool/heat, press the button "Temp"
(fig. 2 F, page 4), until the requested temperature range is reached.
6.6
Connect to the cigarette lighter
I
NOTE
When you connect the cooling box to the cigarette lighter of your
vehicle (fig. 3, page 4), observe that you have to turn on the ignition, if
necessary, so that the device is supplied with current.
6.7
Removing the lid
You can remove the lid of the cooler (fig. 5, page 5):
➤ Open the lid until it is at a ca. 30° angle to the cooler.
➤ Pull the lid forwards and lift it off diagonally.
EN
Temperature range
approx 0 °C in the interior space
approx 16 °C in the interior space
(ECO mode)
approx 65 °C in the interior space
approx 48 °C in the interior space
Operation
13