Environmental Protection - Evolution FURY6 Serie Betriebsanleitung

www.evolutionpowertools.com
FUSE AND PLUG REPLACEMENT
Should the fuse in the main plug of your machine need replacing
it should always be replaced with one of identical rating.
Check the voltage given on your machine matches the supply
voltage.
This machine is supplied with a fitted moulded plug. If you
should need to fit a new plug follows the protocol below.
IMPORTANT
The wire in the mains lead are coloured in accordance with the
following code:
Blue --- Neutral
Brown --- Live
The wire that is coloured blue must be connected to the
terminal that is marked with the letter N. The wire that is
coloured brown must be connected to the terminal that is
marked with the letter L.
A 13AMP (BS1363 or BS1363/A) plug must be used and a
13 AMP fuse must be fitted.

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.
32