Essentielb ERLVI 180-55b1 Bedienungsanleitung Seite 23

Levelling
To avoid vibrations when the unit is running, the appliance must be levelled. To do this, adjust
the adjustable front feet to properly balance the appliance.
Installing and reversing the direction that the door opens
Refer to the following diagrams to install your unit. The appliance is mounted using slides
(included).
You can also change the direction that your refrigerator doors open if necessary, in which
case, remove all the shelves from the door and follow the steps below or contact a qualified
professional.
Unplug the appliance from the power point during installation and when reversing
the opening direction of the door.
Food must be covered to prevent it from absorbing moisture.
Reversing the direction that the door opens
1. Before reversing the direction that the door opens, unplug the appliance and remove all
the food.
2. Use a flat screwdriver to lift and remove the hinge covers.
3. Using a Torx screwdriver or an 8 mm spanner, unscrew the top hinge of the door while
supporting the door (fig. 1).
4. Put the door to the side, somewhere safe.
Fig. 1
23
V.1.0
installation