Connections - Teac PD-D2410 Bedienungsanleitung

DIGITAL IN
(OPTICAL)
B
D
10
Downloaded from www.Manualslib.com
MD, CD-R, DAT, etc.
DIGITAL IN
(COAXIAL)
A
L R
LINE IN
Amplifier
Amplificateur
Amplificador
manuals search engine
< Turn off the power of all the equipment before making

connections.

< Read instructions of each component you intend to use with
PD-D2410.
A
LINE OUT jacks
Connect the LINE OUT jacks to the amplifier by audio signal
connection cords.
LINE OUT w CD IN
< Make sure to connect:
white plug w white jack (L: left)
red plug w red jack (R: right)
< Be sure to insert each plug securely. To prevent hum and
noise, do not bundle the connection cords with the power
cord or speaker cord.
B
DIGITAL OUT terminals
Connect the component with coaxial cables or optical
cables.
DIGITAL OUT w DIGITAL IN (MD, etc.)
< When using DIGITAL OPTICAL OUT terminals, remove the
caps from the terminals. When you do not use them, leave
C
the caps in place:
C
AC Power Cord
Plug this AC power cord into an AC wall socket.
Connections
D
ENGLISH