Specifications - Sharp LL-171ME Bedienungsanleitung

Product specifications
Model name
LL-171ME
LCD display
43 cm measured diagonally TFT LCD module
Resolution (max.)
WXGA 1280 x 768 pixels
Displayable colours (max.)
Approx. 16.19 million colours (6 bit + FRC)
Dot pitch
0.289 (H) x 0.289 (V) mm
Brightness (max.)
260 cd/m
BALANCE" is set to "WARM" in TV/AV mode)
Contrast ratio
600:1
Angle of visibility
Left-right 170°; up-down 170°
(contrast ratio
Screen display size
369.6 (H) x 221.76 (V) mm
Video signal
Analog RGB (0.7 Vp-p) [75Ω]
Sync signal
Separate Sync (TTL level: +/-), Sync on Green,
Composite Sync (TTL level: +/-)
Video colour system
PAL/SECAM/NTSC
TV-standard
B/G, I, D/K, L
Stereo/bilingual
NICAM, A2 stereo
Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to
full screen size.)
[Enlarged display (full screen, Fixed aspect
ratio)]
- 1:1 display is not possible.
Plug & Play
VESA DDC1/DDC2B compatible
Power management
VESA: based on DPMS
Speaker output
2.7 W + 2.7 W
Input terminals
Computer signal: Mini D-sub15 pin (3 rows) x 1
Computer audio: Mini stereo jack (φ 3.5 mm) x 1
Antenna (DIN): x 1
21-pin Euro-SCART (RGB) terminal x 1
Video image: RCA pin x 1
S-video image: x 1
Audio input terminal: RCA pin (L/R x 1)
Headphone terminal
Mini stereo jack (φ 3.5 mm)
Screen tilt
Upward approx. 0-20°; downward approx. 0-5°
Downloaded from www.Manualslib.com
2 2
(PC mode); 400 cd/m (when "WHITE
>
10)
=
manuals search engine

Specifications

Power supply
AC 110-240 V, 50/60 Hz (Uses special AC
adapter, type NL-A69J of Sharp Corporation)
Temperature of operating environment
5-35°C
Power consumption
60 W; 2.2 W in standby; 2.2 W in power-saving
mode (Uses special AC adapter)
Dimensions
Approx. 432 (W) x 184 (D) x 373 (H) mm
Weight
Approx. 5.9 kg (excluding signal cable and AC
adapter)
Approx. 5.0 kg (excluding stand)
Dimensions (Units: mm)
- PC analog signal cable: approx. 1.8 m
- PC audio cable: approx. 1.8 m
- Special AC adapter:
Approx. 1.5 m
Approx. 150 (W) x 60 (D) x 35 (H) mm
Note:
- As a part of our policy of continuous
improvement, SHARP reserves the right to make
design and specification changes for product
improvement without prior notice. The
performance specification figures indicated are
nominal values of production units. There may
be some deviations from these values in
individual units.
E52
432 78
265 184