Watching Tv; Selecting The Channels; Selecting The Channels Using The Programme Table - Sharp LL-171ME Bedienungsanleitung

Selecting the channels

This monitor allows you to select up to 100
channels (0-99).
Using the channel buttons (remote control)
To select a 1-digit channel number (e.g., Channel 5):
Select the channel number using one of the
following procedures.
- Press the 5 button and wait for approximately
3 seconds.
- Press the 0 button followed by the 5 button
within 3 seconds.
To select a 2-digit channel number (e.g., Channel 12):
Press the 1 button followed by the 2 button within
3 seconds.
Using the
- Press the
the order shown below:
1 → 2 ... → 98 → 99 → 0 → 1 → 2 → ...
- Press the
the order shown below:
2 → 1 → 0 → 99 → 98 ... → 2 → 1 → 0 → ...
Notes:
- Pressing one of the above buttons or using the
programme table (see right column)
automatically switches to TV mode if the monitor
is in PC or AV mode.
- Use the INPUT button (monitor) or the TV button
(remote control) to switch the display mode to TV
in the following cases when in PC mode.
- When you are watching TV in the PIP window
(see page E20).
- When you are listening to TV (see page E21).
- Channels set to be skipped cannot be displayed
using the
- Channel "0" is reserved for RF output from a
VCR.
Downloaded from www.Manualslib.com

Watching TV

INPUT
POWER
VIEW MODE
MENU
PC TV
BRIGHT
/
OK
SUBPAGE REVEAL SUBTITLE
MODE
SLEEP
CH
OK
BRIGHT
MODE
/BRIGHT
FREEZE
DISPLAY SOUND
/HOLD
MAIN
POWER
buttons (monitor/remote control)
button and the channel changes in
button and the channel changes in
buttons. (See page E31.)
manuals search engine
Selecting the channels using the
programme table
The programme table shows a list of programmes
in TV memory. They are located in channels 0 to
99. The currently selected programme is displayed
in yellow and child-locked programmes which
PIP
have not been cancelled are displayed in red.
AV1 AV2
TEXT
1. Select the TV mode using the INPUT button
MENU
(monitor) or the TV button (remote control).
2. Press the OK button (remote control).
The programme table will be displayed.
BRIGHT
Note:
- While the Teletext screen or the menu screen
is being displayed, you can not display the
programme table by pressing the OK button
(remote control).
PROGRAMME TABLE
CH
00
01 E02
02 E03
03 E04
04
3. Select the desired programme using the
buttons (remote control).
To display the previous or next list of the
programme table:
- Press the
the cursor is at a programme in the upper-left
or low-right position.
- Press the
the cursor is at a programme in the left or right
column.
4. Display the selected programme using the OK
button (remote control).
E34
<
TV/AV
05 10 15
06 11 16
07 12 17
08 13 18
09 14 19
buttons (remote control) when
buttons (remote control) when
>