Connecting headphones
You can connect a set of headphones to your set if you wish to
watch a tV programme without disturbing the other people in the
room.
When you insert the head set jack into the corresponding port, you
can not operate "Internal Mute" in Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
Selecting the Sound mode
You can set the sound mode by pressing the "Dual" button.
When you press it, the current sound mode is displayed on the
screen.
Audio Type
A2
Stereo
NICAM
Stereo
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
adjusting the Volume automatically
Each broadcasting station has its own signal conditions and
so it is not easy for you to adjust the volume every time the
channel is changed. this feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
EntEr button.
. Press the ▲ or ▼ button to select "Auto Volume", then press
the EntEr button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
EntEr button.
. Press the ExIt button to exit.
Dual 1/2
Mono
Mono
Stereo
Stereo ↔ Mono
Dual
Dual 1 ↔ Dual 2
Mono
Mono
Stereo
Mono ↔ Stereo
Dual
Mono ↔ Dual 1
Dual 2
English - 3
Default
Automatic
You can also set these options
change
simply by pressing the Dual
button on remote control.
Dual 1
Automatic
change
Dual 1
tV
mode
Equalizer
SrS tS xt
auto Volume
Internal mute
Sound Select
reset
tV
mode
Equalizer
SrS tS xt
auto Volume
Internal mute
Sound Select
reset
TV Rear Panel
Sound
: Custom
: off
: off
: off
: main
move
Enter
return
Sound
: Custom
: off
: off
off
: off
on
: main
move
Enter
return