Listening To The Sound Of The Sub Picture; Resetting The Sound Settings To The Factory Defaults; Connecting Headphones; Setting And Displaying The Current Time - Samsung LE27S7 Bedienungsanleitung

listening to the Sound of the Sub Picture

resetting the Sound Settings to the Factory defaults

Connecting headphones

Setting and displaying the Current time

BN68-01001J-01Eng.indd 17
During the PIP features activation, you can listen to the sound of the
sub picture.
1. Press the menu button to display the menu. Press the  or  button to
select "Sound", then press the enter
2. Press the  or  button to select "Sound Select", then press the enter
3. Press the  or  button to select "Sub". Press the enter
4. Press the exit button to exit.
 main: Used to listen to the sound of the main picture.
 Sub: Used to listen to the sound of the sub picture.
You can select this option when the "PIP" is set to "On".
If Game Mode is On, the Reset Sound function is activated. Selecting
the Reset function after setting the equalizer resets the equalizer
setting to the factory defaults.
1. Press the menu button to display the menu. Press the  or  button to
select "Sound", then press the enter
2. Press the  or  button to select "Reset", then press the enter
3. Press the exit button to exit.
You can select this option when the "Game Mode" is set to "On".
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
You can set the TV's clock so that the current time is displayed when
you press the INFO button. You must also set the time if you wish to
use the automatic On/Off timers.
1. Press the menu button to display the menu. Press the  or  button to
select "Setup", then press the enter
2. Press the  or  button to select "Time", then press the enter
3. Press the enter
button to select "Clock Set".
4.
to...
Move to "Hour" or "Minute"
Set the "Hour" or "Minute"
Press the enter button.
5. Press the exit button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-7
button.
button.
button.
button.
button.
button.
button.
Press the...
 or  button.
 or  button.
2006-06-13 ¿ÀÈÄ 1:17:09