Holzmann HBS 470 PROFI Originalbetriebsanleitung Seite 24

OPERATION INSTRUCTIONS
2mm behind the teeth of the blade.The rear face plate prevents excessive backward movement of
the blade whilst in operation , and should be 1-2
mm from the back of the blade: this can be adjusted by srew "C"(Fig.4.5.1).
Lower saw BLADE guide
- To face plate should lightly touch the blade, to
prevent vibration during operation and ensure
correct direction of cutting. The positioning of
these face plate is controlled by screw
"A"(Fig.4.5.2), once they have been adjusted,
tighten the screw "A"(Fig.4.5.2); they should be
2 mm behind the teeth of the blade.The thrust
shaftprevents excessive backward movement of
the blade whilst in operation , and should be 1-2
mm from the back of the blade: this can be ad-
justed by srew "B"(Fig.4.5.2).
Seite 24
HOLZMANN Maschinen Austria  www.holzmann-maschinen.at
Holzbandsäge/ Wood bandsaw HBS 470PROFI