Console Instructions - SPORTSTECH DFX50 Handbuch

Display functions
T (time) Time elapsed since traning started
D (distance) Distance covered
C (number) Number of pedal rotations
T-C (number per Revolutions per minute after the
time) start of training. When resetting
again "0"
CA (calories) Calories burned during exercise.
SCAN The functions mentioned above
are displayed alternately and chan-
ge every 5 seconds
Operation of the console
Start When the pedal rotation begins, the console switches on automatically and
begins to count.
Stop If the exercise is stopped, "STP" appears in the upper left corner of the LCD
display after 4 seconds. The device switches off automatically after 2 minutes.
Reset to default To reset the values, press and hold the button for 3 seconds.
Function selection Repeatedly press the button briefly to scroll through and display the desired
function. Your current selection is indicated by the arrow.
Display function If "SCAN" is displayed in the upper part of the screen, the displayed function
changes every 5 seconds.
Note: This device generates a radio frequency for the transmission of data and meets all conformity
requirements according to European standards. The design is such so as to provide reasonable pro-
tection against interference. Nevertheless, there may be overlaps and interactions with other house-
hold appliances. If this occurs, locate any transmitters and receivers that are in close proximity to the
device and remove them from the immediate vicinity.

CONSOLE INSTRUCTIONS

24
T D C T-C CA
0
STP
SCAN TIME DIS COUNT
T-COUNT CALORIES