Senco DS522-18V Betriebsanleitung Seite 5

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product in a better, safer manner.
SYMBOL NAME
Safety Alert
Read Operator's
Manual
Eye Protection
Wet Conditions Alert
No Hands
Recycle
V Volts
min Minutes
Direct Current
n o
No Load Speed
.../min Per Minute
SYMBOLS
MEANING
Indicates a hazardous situation, which, if not avoided, will result in death
or serious injury.
Indicates a hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates a hazardous situation, which, if not avoided, may result in minor
or moderate injury.
(Without Safety Alert Symbol) indicates information considered important,
but not related to a potential injury (e.g. messages relating to property
damage).
DESIGNATION/EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply with ANSI
Z87.1. CE EN166
Do not expose to rain or use in damp locations.
Failure to keep your hands away from blade will result in serious personal
injury.
This product uses Lithium-ion batteries. Local, state, or federal laws may
prohibit disposal of batteries in ordinary trash. Consult your local waste
authority for information regarding available recycling and or disposal
options.
Voltage
Time
Type or characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits, etc. per minute
5
EN