bürkert 2030 Kurzanleitung Seite 11

Type 2030, 2031, 2032,
2033, 2037
For valve bodies without angle information, you can find the self-drain-
age-angle on the Internet. www.Buerkert.com. Type / User Manuals /
Additional manual „Angles for self-draining of diaphragm valves
Mark for self-draining
Inclination
angle of the
pipeline
If you require clarification, contact your Bürkert sales department.
7.2 Installation position T-valve type
2032
For the installation of the T-valves into circular pipelines, we rec-
ommend the following installation positions:
For supply of a medium:
Installation
upwards
α
For removal of a medium:
7.3 Installation position Y-valve type
2037
For the installation of the Y-valves into systems, we recommend
the following installation positions:
For supply of a medium:
7.4 Installation into the pipeline
7.4.1 Preparatory work
→
Clean pipelines (sealing material, swarf, etc.).
→
Support and align pipelines.
7.4.2 Installation requirements
• Ensure that pipelines are in alignment.
• Flow direction as required.
If used in an aggressive environment, we recommend con-
veying all free pneumatic connections into a neutral atmo-
sphere with the aid of a pneumatic hose.
english
For removal of a medium:
11