Delivery Specifications; Description Of Device; Fsa 450 Top Controls - Bosch FSA 450 Bedienungsanleitung

26 | EN
3.

Delivery specifications

The delivery specification for the FSA 450 kit
is as follows:
Basic equipment
• Tester: FSA 450 Engine Analyzer
• Secondary Ignition Probe
• Trigger clamp (IGN)
• Power pack with mains connection cable
• Connecting cable B+/B–
• Cigarette Lighter DC Power Cable
• Primary Ignition Probe
• Multi measuring cable CH1 (red/black)
• Multi measuring cable CH2 (blue)
• Multi measuring cable CH3 (green)
• Multi measuring cable CH4 (yellow)
• Probe handle with tip (black)
• Probe handle with tip (red)
• Probe alligator clip (black)
• Probe alligator clip (red)
• Probe alligator clip (blue)
• Probe alligator clip (green)
• Probe alligator clip (yellow)
• Ground doubler (for connecting multiple
probes to ground)
• Ground leads
• Operator's manual
• Storage case
• Stylus for touch screen
• Self-test adapter
• RS232 interface cable
• Software CD
• Safety manual
1 689 979 945 (28.07.2006)
4.

Description of device

The FSA 450 is a handheld tester with a
keypad and touch screen with a full-color
display that operates as a stand-alone unit.
4.1

FSA 450 top controls

3
2
1
Fig. 2: FSA 450 top controls
1. Ground
2. CH1
3. Auxiliary
4. CH2, CH3, CH4
5. PRI IGN
6. Trigger
7. SEC IGN
8. DVOM
9. 12V input
Only voltages up to 200 V can be applied
to the CH1/CH2/CH3/CH4 inputs. Never
apply a higher voltage.
Only voltages up to 400 V can be applied
to the DVOM inputs. Never apply a higher
voltage.
FSA 450
5
4
6
7
8
9
Robert Bosch GmbH