G&D DP-Vision-IP-Fiber-Serie Installation Und Bedienung Seite 91

Keyb./Mouse: Connect the mouse and/or the keyboard of the local console to this
interface.
DP Out: Connect the monitor of the local console to this interface.
Establishing a connection to the Gigabit Ethernet
IMPORTANT: The devices use components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE: Remove the protection caps from the Transmission interfaces and from the
cable plug.
Insert the LC plug of a fibre optic cable, which is available as acces-
Transmission|Tx:
sory, into this interface. Connect the other end to the Gigabit Ethernet.
Transmission|Rx: Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Gigabit Ethernet.
Establishing the power supply
Main Power: Insert one of the supplied IEC cables here.
Red. Power: To provide a second, redundant power supply, connect a portable power
pack to this interface.
Installation
G&D DP-Vision-IP-Fiber · 10