G&D DP-Vision-IP-Fiber-Serie Installation Und Bedienung Seite 128

Configuration
How to configure the Freeze mode:
1. Press
Ctrl+Num
2. Select the row
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
3. Under Freeze mode
off  Freeze mode is disabled (default)
on  Freeze mode is enabled
4. If the Freeze mode is active, press
under Freeze visualization
frame
OSD
frame+OSD
5. Press F2 to save your settings.
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click 
on Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. In the Freeze mode
Off
On | OSD timer + frame
Frame
OSD
6. Click on Save
47 · G&D DP-Vision-IP-Fiber
(default) to open the on-screen display.
Console setup and press
press F8 to select on of the following options:
:
 shows a coloured frame when disconnected
 shows Frozen and the time passed since disconnection
 shows a coloured frame (
KVM extender
.
Video channels
Configuration .
field, select one of the following options:
 Show no image if the connection is lost (default).
 Display of a coloured frame in case of a
disconnection as well as display of the warning
Frozen and the time elapsed since the
disconnection.
 A disconnection is indicated by a coloured frame.
 Display of the warning Frozen and the time elapsed
since the disconnection.
.
Enter .
F8 to select one of the options available
frame ) and Frozen (
.
.
OSD )