Updating The Firmware - Megasat Satmaster Portable Bedienungsanleitung

5. Updating the firmware

Updating of the Classic and Premium version
Updating of the Professional version
Connect a serial cable
14
Connect a serial cable
to the interface
to the interface
SETTOP ANT DATA DC12-24 V
ENGLISH
5. Updating the firmware
1. Turn off the control unit, or the power splitter and connect the COM port of the PC
with the serial interface. The cable must be RS-232, and „USB to serial" support.
2. Start the DOWNLOAD program.
3. Select the path of your update file via „Open".
4. Select the COM-port of your computer you wish to use and activate it.
5. Turn on the control unit or the power supply.
The download starts by itself.
6. After the download is complete, turn off the controller or the power supply and
disconnect the data cable.
If the antenna is al-
ready on, then turn
it off and back on, so
that the download
starts. In ‚Com Port
Select' Only num-
bers are displayed
to the COM ports
that can be used. The
program
Windows XP and
Windows 7, no Vista.
ENGLISH
supports
15