DeLonghi Pinguino F120ECO Betriebsanleitung Seite 91

installed
To install, proceed as follows:
• Make a hole in a wall communicating with
the outside or through the pane of a win-
dow Respect the height and dimensions
given in figure D
.E
2, W
in a window
pane
3*th
„30 51
.
«9*33
2. ·.Un.:,, Lg [ 1 --
9 »:.. o : 0-4 :r,°
- u : %). : 0.- l' 7:
30-,L. './.20 C:,6
in the wood sill in the wall: for
of a window
optimum results,
insulate the sec-
tion of the wall
with suitable
insulating mate-
rial.
• Fit the flange Fiä] supplied to the hole.
• Fix the hose b-71 to the coupling on the
ge FiXI as shown in the figure E. .
' -MAX 1 1 5 cm L-
... '']
. .6
-1
MIN 50 cm
V¥
When the hose is not attached, close the
hole with the bung on the flange .
NOTE:
When the unit is installed semi-permanently,
we recoinmend leaving a door slightly open
(1 cm is enough) to ensure an adequate
exchange of air.
DEHUMIDIFICATION (mod. F 130 eco only)
Position the appliance in the room without
inserting the hose; in this way the dehumidi-
fied air will exhaust directly into the room
0
...@@=®@ -,OBP- .
4-
1
17