Troubleshooting; Power Indicator Is Not Illuminated; Fuse Replacement; No Sound - Rotel RC1590SIL Bedienungsanleitung

16
NOTE: All previously configured options will be erased and reset to
the factory default settings.

Troubleshooting

Most difficulties in audio systems are the result of incorrect connections,
or improper control settings. If you encounter problems, isolate the area
of the difficulty, check the control settings, determine the cause of the fault
and make the necessary changes. If you are unable to get sound from the
RC-1590, refer to the suggestions for the following conditions:

Power Indicator Is Not Illuminated

The Power Indicator ring around the power button and the basic items in the
Display window should be illuminated whenever the RC-1590 is plugged
into the wall power outlet and the POWER switch is pushed in. If it does not
light, test the power outlet with another electrical device, such as a lamp.
Be sure the power outlet being used is not controlled by a switch that has
been turned off.

Fuse Replacement

If another electrical device works when plugged into the power outlet, but
the Power Indicator still will not light when the RC-1590 is plugged into
the wall outlet, it indicates that the internal power fuse may have blown.
If you believe this has happened, contact your authorized Rotel dealer to
get the fuse replaced.

No Sound

Check the signal source to see if it is functioning properly. Make sure the
cables from the signal source to the RC-1590 inputs are connected properly.
Check all the wiring between the RC-1590 and the power amplifier, and
the speakers.

Playable Audio Format

USB Apple (iPhone, iPod, iPad)
Format
Any supported file loaded to Apple device. Phone
Any supported file
may resample depending on stored format. May
loaded to Apple
exclude Apps designed to play formats not originally
device.
supported by the sending device.
APTX Bluetooth
Format
Any format supported May exclude Apps designed to play formats not originally
by the sending device. supported by the sending device.
PC-USB
Format
Format determined Any supported format by the PC software
by the Media Player/ PCM Audio: 44.1k, 48k, 88.2k, 96k, 176.4k, 192k
Server software that (16 bit and 24 bit)
you use. DSD64 and DSD128
Coax/Optical
Format
44.1k, 48k, 88.2k, 96k, 176.4k, 192k
SPDIF LPCM
16 bit, 24 bit
Notes
Notes
Notes
Notes

Specifications

Total Harmonic Distortion (20 Hz - 20k Hz)
Input Sensitivity / Impedance
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Output Level
Line Level (RCA)
Balanced (XLR)
Frequency Response:
Phono Input
Line Level Inputs
Signal to Noise Ratio (A weighting)
Phono Input
Line Level Inputs
Channel Separation
Phono Input
Line Level Inputs
Digital Section
Frequency Response
Signal to Noise Ratio (A weighting)
Digital Inputs
PC-USB
General
Power Requirements:
USA:
EC:
Power Consumption
Standby Power Consumption
BTU
Dimensions (W x H x D)
Front Panel Height
Weight (net)
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel Hi-Fi logo are registered trademarks of The Rotel Co., Ltd, Tokyo,
Japan.
RC‑1590 Stereo Control Amplifier
< 0.002%
2.5 mV / 47k ohms
150 mV / 100k ohms
250 mV / 100k ohms
1 V
2 V
20 Hz - 20k Hz, 0 ± 0.2 dB
10 Hz - 100k Hz, 0 ± 0.1 dB
80 dB
112 dB
> 75 dB
> 75 dB
20Hz - 20kHz ±
( 0.5 dB, Max)
108 dB
SPDIF LPCM
(up to 192kHz 24 bit)
USB Audio Class 1.0
(up to 96kHz 24 bit)
USB Audio Class 2.0
(up to 192kHz 24bit)*
*Driver installation required
120 Volts, 60 Hz
230 Volts, 50 Hz
45 watts
< 0.5 watts
78 BTU/h
431 x 144 x 348 mm
(17 x 5 / x 13
11 7
16
3U (132.6 mm, 5
1
9.2 kg, 20.28 lbs.
/ ins)
9
/ ins)
4