Pole Mount Adaptor; Instructions For Normal Operation; Maintenance; Routine Maintenance (To Be Performed On A Periodic Basis) - Videotec NXPTZ 2 Serie Bedienungsanleitung

10.5 Pole mount adaptor

Pole mount adaptor.
Fig. 20 NXPTZCOL.
11 Instructions for normal
operation
Do not use the wiper if the outside
temperature is below 0°C (+32°F) or in case
of ice.
If it is left on, the wiper automatically
disables itself.
The device control can be performed through
different modes.
• Through the user's controls of the web interface (
9.2 Web interface, page 21).
• Through Video Management Software (VMS)
that supports the ONVIF protocol. In this case
the Special controls are implemented using the
auxiliary commands of the ONVIF protocol.
• Through PTZ Assistant software (refer to the
manual of the product).
MNVCNXPTZ2_2008_EN

12 Maintenance

Before doing any technical work on the
device, disconnect the power supply.
CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.
The manufacturer declines all liability for
damage to any of the apparatus mentioned
in this handbook, when resulting from
tampering, use of non-original spare parts,
installation, maintenance and repairs
performed by non-authorised, non-skilled
personnel.
For damage to any parts, repair or
replacement must be done by, or under
supervision of VIDEOTEC.
Whenever replacing the parts as indicated,
always use VIDEOTEC original spare parts
and meticulously follow the maintenance
instructions supplied with every spare parts
kit.
For all maintenance interventions, we
recommend you return the product to the
laboratory that will perform all required
operations.
When contacting VIDEOTEC for assistance please
provide the serial number and the identification code
of the model.
12.1 Routine maintenance (to be
performed on a periodic basis)

12.1.1 Inspecting the cables

The cables should not show signs of damage or wear,
which could generate hazardous situations. In this
case extraordinary maintenance is necessary.
23