Using Bluetooth Devices; Registering Bluetooth Devices - Unify Gigaset S400 professional Bedienungsanleitung

Using Bluetooth devices

Using Bluetooth devices
Your handset Gigaset S400 professional
can communicate wirelessly via Blue-
tooth™ with other devices using this tech-
nology.
Before you can use your Bluetooth
devices, you must first activate Bluetooth
and then register the devices to the
handset.
You can register 1 Bluetooth headset to
the handset. You can also register up to
5 data devices (PC, PDA) to send and
receive directory entries as vCards or
exchange data with the computer
(¢ page 60).
To use the phone numbers, dialling codes
(country and area code) must be stored in
¢
the directory ( page 50).
You will find a description of how to oper-
ate your Bluetooth devices in the user
guides for these devices.
Please note
u
You can operate headsets on your
handset that have the headset or
handsfree profile. If both profiles
are available, the handsfree profile
is used to communicate.
u
It can take up to 5 seconds to estab-
lish a connection between your
handset and a Bluetooth headset.
This applies both when a call is
accepted using the headset or
transferred to the headset, and
when a number is dialled from the
headset.
Activating/deactivating Bluetooth
mode
ò
¢ ¢
v
Activation
Press to activate or deactivate Blue-
§Change§
tooth mode (³ = activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated
¢
( page 3).
44

Registering Bluetooth devices

The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
Please note
u
If you register a headset, any head-
set that is already registered is over-
written.
u
If you would like to use a headset
with your handset that is already
registered to another device (e.g.,
to a mobile phone), please deacti-
vate this connection before you
start the registration process.
ò
¢ ¢
v
Search for Headset
Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
is shown on the display.
Press the display key.
§Options§
Trust Device
Select and press
~
Enter the PIN for the Bluetooth
device you want to register
and press
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
Press the display key.
§Cancel§
Repeat search if necessary:
Press the display key.
§Options§
Repeat Search
Select and press
/
.
§OK§
.
§OK§
.
§OK§