Protecting Against Unauthorised Access; Resetting The Base To The Factory Settings - Unify Gigaset S400 professional Bedienungsanleitung

Setting the base
•
Protecting against
unauthorised access
Protect the system settings of the base
with a PIN known only to yourself. The sys-
tem PIN must be entered when, for exam-
ple, registering/de-registering a handset
to/from the base or when restoring the
default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base (default setting: 0000) to a 4-
digit PIN known only by you.
Ï
¢ ¢
v
System
~
Enter the current system PIN
and press
~
Enter your new system PIN
and press
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code
0000:
Disconnect the power cable from the
base. Hold down the registration/paging
key on the base while reconnecting the
power cable to the base. Hold down the
key for at least 5 seconds.
The base has now been reset and the sys-
tem PIN set to 0000.
Please note
All handsets are de-registered and
must be re-registered. All settings are
reset to the factory settings.
52
¢
System PIN
.
§OK§
.
§OK§
•
Resetting the base to the
factory settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered
u
Eco Mode is activated and Eco Mode+
is deactivated,
u
The system PIN is not reset.
Ï
¢ ¢
v
System
~
Enter the system PIN and
press
§OK§
Press the display key.
§Yes§
¢
Base Reset
.