Accessories; Supplementary Documentation - Endress+Hauser iTEMP TMT111 Bedienungsanleitung

7 Accessories

8 Supplementary
documenta-
tion
Endress+Hauser
Presettable parameters
Service functions ■ Simulation analog output (on/off)
■ Password assignment
When the interface cable is connected (see chapter 'Accessories'),
the technical specifications (e.g. measured error) are not
observed. For this reason, during operation disconnect the
connection via the interface cable between the transmitter and PC.
®
For detailed ReadWin
online documentation contained in the ReadWin
Configuration sets:
■ PC interface cable (USB-plug) Commubox FXA291;
order-code: 51516983
■ TXU10-AA: Setup software ReadWin
cable with 4-pole USB-plug;
order-code: TXU10-AA
®
ReadWin 2000 can be downloaded free of charge from the Internet
from the following address: www.endress.com/readwin
readwin
Technical information iTEMP
(TI135R/09/en)
2000 operating instructions please read the
®
2000 and PC serial interface
®
TMT111, DIN rail:
TMT111
®
2000 software.
ess.com/
13