Recording Onto A Pc; Complete Settings - TrueCam M7 GPS Dual Benutzerhandbuch

10. RECORDING ONTO A PC

A Remove the Micro SD card when the camera is off and insert it into the computer
›
Depending on the computer equipment, either directly, using a Micro SD/SD adapter or a Micro
SD/USB adapter (included)
B Open the removable disk folder and play a file
›
Any regular video player can be used
C Use a special player to play videos, including data, from the optional GPS module
›
At the same time as the video, you can view the speed travelled, the GPS coordinates and direc-
tions on the map
›
The app is available at http://truecam.com/download/M7GD_player.zip

11. COMPLETE SETTINGS

SETTINGS
Resolution
Loop recording
WDR
Brightness
Motion detection
Parking mode
Record audio
G-Sensor sensitivity
Date stamp
GPS stamp*
DESCRIPTION
Sets the video / photo resolution
Higher resolution = more detail and larger file
Sets the length of each loop
Longer loop = larger file
Loop recording can also be turned off and recording will end if the SD card
is full
When turned on, the camera compensates for luminance when there are
very bright and very dark areas in the picture
Sets the overall brightness of the recording
At the same time, the camera automatically adjusts the brightness of the
recording depending on the light
Turns motion detection on / off
Turns parking mode on / off
Turns the microphone on / off
Also possible to switch by holding down the MENU / MODE button while
recording
Sets the sensitivity of the G-Sensor
Displays time and date in video
Displays the GPS coordinates in the video
7