AEG BP630302I Benutzerinformation Seite 27

Problem
The oven does not heat up.
The lamp does not operate.
It takes too long to cook the
dishes or they cook too
quickly.
Steam and condensation
settle on the food and in the
cavity of the oven.
The display shows "C3".
The display shows "F102".
The display shows an error
code that is not in this table.
Downloaded from www.Manualslib.com manuals search engine
Possible cause
The fuse is blown.
The lamp is defective.
The temperature is too low
or too high.
You left the dish in the oven
for too long.
The cleaning function does
not operate. You did not
fully close the door, or the
door lock is defective.
• You did not fully close
the door.
• The door lock is defec-
tive.
There is an electrical fault.
ENGLISH
Remedy
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
Replace the lamp.
Adjust the temperature if
necessary. Follow the advice
in the user manual.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Fully close the door.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact the
Customer Care Depart-
ment.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
27