Siemens sitrans LR260 Kurzanleitung Seite 13

Handheld Programmer
(Part No. 7ML1930-2AJ)
The programmer is ordered
separately.
Key functions in Measurement mode
Key
7ML19985XH81
Downloaded from www.Manualslib.com
Function
Updates the loop
current.
Updates internal
enclosure tempera-
ture reading.
Updates echo confi-
dence value.
Updates distance
measurement.
Mode opens
PROGRAM mode.
RIGHT arrow
opens PROGRAM
mode.
UP or DOWN arrow
toggles between
linear units and %
SITRANS LR260 (HART) – QUICK START MANUAL
manuals search engine
C
Result
New value is displayed in LCD secondary region.
New value is displayed in LCD secondary region.
New value is displayed in LCD secondary region.
New value is displayed in LCD secondary region.
Opens the menu level last displayed in this power
cycle, unless power has been cycled since exiting
PROGRAM mode or more than 30 minutes have
elapsed since PROGRAM mode was used. Then top
level menu will be displayed.
Opens the top level menu.
LCD displays measured value in either linear units
or percent.
Page EN-11