Pari O-PEP Gebrauchsanweisung Seite 51

CAUTION
Risk of infection due to moisture
Moisture encourages the growth of bacteria.
• Remove all parts from the disinfector as soon as the disin-
fection process is finished and allow them to dry.
Regarding the performance of the disinfection, the duration of
the disinfection procedure and the quantity of water required,
follow the instructions for use of the disinfector you are using.
DRY:
• After the disinfection process is complete, place all parts on
a dry, clean and absorbent surface and allow them to dry
completely.
Chemical disinfection
To ensure safety when handling chemicals, follow the instruc-
tions for use of the disinfecting agent, particularly the accompa-
nying safety instructions.
EQUIPMENT:
– 1 sterilisation tablet
Active substance: Sodium dichlorisocyanurate
– 5 l drinking water (cold, no warmer than room temperature)
– Receptacle with at least 5 l capacity
Validated with Milton
PROCEDURE:
CAUTION
Risk of infection due to growth of bacteria
Inadequate disinfection encourages the growth of bacteria
and thus increases the risk of infection.
• Observe the mixing proportions indicated and the spe-
cified treatment time.
• Ensure that all components are completely submerged in
the solution for the whole of the treatment time. There
must not be any air pockets or bubbles.
– 19 –
®
sterilisation tablets