Cleaning The Ice Cube Container - Siemens KAD Serie Montage- Und Gebrauchsanleitung

Removing vegetable container with humidity control
1. Pull out vegetable container.
2. Take out the glass shelf.
3. Remove the moisture cover.
Replacing vegetable container with humidity control
1. First replace the moisture cover.
2. Insert the glass shelf.
3. Slide the vegetable container back in.
Cleaning the water collection tray
Spilled water collects in the water collecting tray.
To empty and clean, remove the filter. Wipe out water
collecting tray with a sponge or absorbent cloth.

Cleaning the ice cube container

If ice cubes have not been dispensed for a prolonged
period, they will shrink, have a stale taste and stick
together.
Pull out the container, empty and clean with lukewarm
water.
m
Caution
A full ice cube container is heavy!
After cleaning, dry the container and feed screw
thoroughly to prevent the new ice cubes from sticking.
Inserting the ice cube container
Push the ice cube container all the way back onto
the supports until it locks into position. Ice cube
production continues.
Note
If the container cannot be pushed all the way back,
twist the screw conveyor in the container or remove
frozen ice cubes from the area of the shelf.
Camera
The camera lenses are covered with a moisture-
repellent film.
You can clean this with a micro-fibre cloth.
Replace the film if it is damaged.
en
57