Maintenance; Frame; Pushchair Seat - KIDDY Click'n Move Bedienungsanleitung

ENG

11. Maintenance

11.1 Frame

Check the frame regularly for loose screws and rivets, worn parts and
breakage.
Stop using your "kiddy click'n move" if you discover a defect. Defective parts
must be replaced or repaired before you use the travel system again.
If a wheel begins squeaking, spray a small amount of silicon oil or place a
drop of fine machine oil on the axle. Wipe away any excess oil.
To clean your "kiddy click'n move", use a mild soap and water. Never use
astringent cleansers or grease-cutters.
If you have problems, please consult your dealer.

11.2 Pushchair seat

Check the seat regularly for splitting seams or other damage.
To clean the seat frame, use a mild soap and water. Never use astringent
cleansers or grease-cutters.
The seat cover is removable and can be washed with delicates at 30°C. Do
not use a spin cycle or a wringer on the seat cover.
23