Own Training; Saving A Program - Tunturi E45 Betriebsanleitung

note that this profile allows you to separately adjust the
peaks and the basic level of effort.
P5 Power Interval
225
200
175
150
125
100
75
50
25
0
3-peak heart rate profile for the
PROFILE P6.
improvement of oxygen uptake capacity. With relatively
longlasting peaks, this profile is suitable for beginners.
With default setting, max. HR value is 125, average HR
is 112.
P6 Fatburner 1
180
160
140
120
100
80
60
40
20
0
Uphill heart rate profile where the heart
PROFILE P7.
rate increases steadily until the midpoint of the profile,
steadily decreasing thereafter. This profile is suitable for
beginners. With default setting, max. HR value is 150,
average HR is 121.
P7 Fatburner 2
180
160
140
120
100
80
60
40
20
0
3-peak heart rate profile for the
PROFILE P8.
improvement of endurance fitness. Peaks are relatively
longlasting, but the heart rate level remains fairly
constant throughout. This profile is suitable for all
fitness levels. With default setting, max. HR value is
140, average HR is 120.
P8 Cardio Strength
180
160
140
120
100
80
60
40
20
0
Uphill heart rate profile for the
PROFILE P9.
improvement of endurance fitness. Peaks are relatively
longlasting, increasing in intensity until the closing
10
Duration
Duration
Duration
Duration
phase of the profile. This profile is specifically suitable
for the physically fit. With default setting, max. HR
value is 170, average HR is 131.
P9 Cardio Climb
180
160
140
120
100
80
60
40
20
0
Duration
PROFILE P10. 3-peak heart rate profile for the
improvement of oxygen uptake capacity. Peaks are
relatively longlasting, with each followed by a steady
recovery period. This profile is specifically suitable for
the physically fit. With default setting, max. HR value is
160, average HR is 133.
P10 Cardio Interval
180
160
140
120
100
80
60
40
20
0
Duration
T-RIDE
T-RIDE TRAINING simulates riding a bike on a
natural terrain. During training, you can change gears
using the selection dial and watch the altitude profile.
1. Select T-RIDE.
Select the terrain and confirm your selection.
2.
Set the starting point for the session using the
3.
selection dial.
Set the ending point for the session using the
4.
selection dial.
5. Start your training session by pedalling. You can
change gears (1–8) using the selection dial. During
training, you can display altitude profile or heart rate
using the selection dial. The heart rate display requires
heart rate measurement.
6. Once you have completed the route, the meter beeps
and the training session ends.
To stop the training session, press the BACK/STOP
7.
button. You can then stop the session by selecting EXIT,
save the session to the memory by selecting SAVE AND
EXIT or continue your training session by selecting
CONTINUE.

OWN TRAINING

You can create and save up to 100 training programs on
the meter.

SAVING A PROGRAM

1. End your training session by pressing BACK/STOP.
Select SAVE AND EXIT and confirm your selection.
2.
3. Enter a name for the training session and confirm it
using the selection dial.