SHINOLA 5021.D Bedienungsanleitung Seite 7

ACCUMULATED TIMING
Example
1 Start: start timing
Stop: e.g., 15 min. 5 sec. following
2
3 Restart: timing is resumed
4 *Stop: e.g., 13 min. 5 sec. following
The accumulated time = 28 min. 10 sec.
5 Reset: the three chronograph hands
are returned to their zero positions.
Please note:
4
* Following , the accumulation of the timing can be
continued by pressing push-button
INTERMEDIATE OR INTERVAL TIMING
Example
1 Start: start timing.
2 Display interval:
e.g., 10 min. 10 sec. following 1 .
Timing continues in the background.
*
3 Making up the measured time:
the three chronograph hands are quickly
advanced to the ongoing measured time.
4 Stop: e.g., 28 min. 10 sec. following
5 Reset: the three chronograph hands
are returned to their zero positions.
Please note:
3
* Following , further intervals or intermediates can be
displayed by pressing B (display interval / make up measured time, ...)
Downloaded from www.Manualslib.com
1
1 .
A
3 .
B
5
A (Restart/Stop, Restart/Stop,...)
A
1 .
B
12
manuals search engine
CHRONOGRAPH MODEL 5050.B
4
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
3
2
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
(= normal position).
- the four chronograph hands are
precisely at zero position following
activation of push-button B. If the
hands are not precisely at zero,
their positions must be adjusted.
(See the chapter Adjusting the
Chronograph Hands to Zero .)
SETTING THE TIME
1 Pull out the crown to position III.
(The watch stops.)
4
1
2 Turn the crown until you reach the
correct time.
Push the crown back to position I.
3
SETTING THE DATE
2
1 Pull out the crown to position II.
3
5
(The watch continues to run.)
2 Turn the crown until the correct date appears.
Push the crown back to position I.
3
Center stop-second
Minute hand
I
Hour hand
Minute counter
Hour counter
1 / Second counter
10
Big date
13
A
I
B
Second hand
1
I II III
2
3
1
II
2
3