Adjusting The Chronograph Hands To Zero Position - SHINOLA 5021.D Bedienungsanleitung

INTERMEDIATE OR INTERVAL TIMING
Example
Start: Press push-button A.
Display interval:
e.g., 10 min. 10 sec. following 1
Timing continues in the background.
*
Making up the measured time:
The chronograph hands are quickly
advanced to the ongoing measured time.
Stop: Final time is displayed.
Reset: The three chronograph hands are
returned to their zero positions.
Please note:
* Following 3 , further intervals or intermediates can be
displayed by pressing B (display interval / make up measured time, ...)
Downloaded from www.Manualslib.com
.
24
manuals search engine

ADJUSTING THE CHRONOGRAPH HANDS TO ZERO POSITION

Example
One or several chronograph hands are not in
their correct zero positions and have to be
adjusted (e.g. following a battery change).
A
Pull out the crown to position II.
(All chronograph hands are in their correct
or incorrect zero position).
Keep push-buttons
simultaneously for at least 2 seconds then release
B
(the second counter hand rotates by 360º
—corrective mode is activated).
Adjusting the second counter hand:
Single step — press
Continuous — press
Adjusting the next hand — press
Adjusting the 1⁄10 second counter
hand (position 6h):
Single step — press
Continuous — press
Adjusting the next hand — press
Adjusting the minute counter (position 9h):
Single step — press
Continuous — press
Returning the crown to position I.
(Termination of the chronograph hands
adjustment (can be carried out at any time).
A and B depressed
A 1x short
A long
B
A 1x short
A long
B
A 1x short
A long
25
A
B