Selecting The Operation Method - Walimex Pro W1 TTL Gebrauchsanleitung

7.16 Selecting the operation method

Press the <CH/OK> Button for 5 seconds to switch the operation methods
(Method 1/Method 2).
W1 TTL T-C Operation Method 1(by default)
TTL/M Mode
Button
CH/OK
GR
MODE
Select
Dial
701_walimex pro Funkauslöser W1 TTL T-C_BDA.indd 42
Downloaded from www.Manualslib.com
Operation Function
(under normal status) Enter CH settings;
Short press
(under settings) Confirm and back to normal status
Double-click Control the ON/OFF of modelling flash
Long press for
Enter C.Fn custom settings
2 seconds
Long press for
Switch the Operation Methods (Method 1/Method 2)
5 seconds
Short press Select the POWER/FEC settings
Long press for
Select all the group
2 seconds
(under normal status) Switch the <Group > mode
Short press
(TTL/M/OFF in the GR mode; TTL/M/Multi in the
NON-GR mode)
Status Function
Normal
Set the <Group >
Set the
Adjust the channel amount
channel
Set the group Adjust the group's POWER/FEC amount
manuals search engine
42
3/12/2018 1:15:17 PM